- Response Sirens & Speakers
- >
- Hand Held Siren Amplifier and Light Controller P/N:S-CONT001
Hand Held Siren Amplifier and Light Controller P/N:S-CONT001
SKU:
£130.00
130
133
£130.00 - £133.00
Unavailable
per item
Prices exclude VAT
- 100W Hand-Held Remote Siren.
- Hand Held Siren Amplifier and Light Controller.
- ECE R10 EMC safety compliance
- 4 x 0.2 amp Auxiliary power outputs.
- 4 Tones, 3 Modes Siren, Radio and Microphone.
- Full Electrical Settings with Volume Adjustable.
- Siren Input Current: 10 Amps (@13.6VDC - single 100W speaker)
- Siren Standby Current: Less than 150mA
- Audio Frequency: 200Hz - 10kHz ± 3db
- Audio Output: 40 watts (@13.6VDC-single 100W speaker)
- Siren Output Power: 100 WATTS RMS MAX. (14VDC - single 100W speaker)
- Output Load: Single 11 Ohm Speaker
- Siren Frequency: 725Hz - 1465Hz
- Operating Temp: -25°C to 60°C (-15°F to + 140°F)
- Light Controls: 4 - on/off lighted push-button switches with replaceable legends.
- Light Output Ratings: Built-in 0.2A fuse on each of the 4 outputs.
- Tones: Horn: Composite (Constant). Wail: 12CPM. Yelp: 190CPM. Phaser: 650CPM. HILO: 60CPM.
- Size: Siren Amplifier 161mm x 178mm x 69mm | Controller: 56mm x 140mm x 33mm
Siren Controls:
- 3 push-button Mode switch (SIREN, RADIO, PA).
- Momentary push-button Horn switch.
- Momentary push-button Manual/Tone toggle switch.•IGN (Ignition) Input Connection.
- HORN Input Connection.
Siren Connections:
- SW1, SW2, SW3, SW4 (Light), +VDC, -GND, IGN (Ignition),
- RAD (Radio) x2, HORN (Horn Ring Transfer), SPK x2